|
Introduction |
| This guide is for the replacement of the USB-C module for the Sony Xperia XA1. It is common that after some time the USB-C receiver can go bad. | | | If your phone fails to charge, it may be time to replace your USB-C module. Before using this guide, check if there is anything blocking the charging cable from connecting properly. | | | Use a flashlight and inspect for dust, dirt or other debris. If you find some, use a an ESD safe brush and gently scrape it out. For extra measure, blow into the USB-C hole to ensure the debris is out. Repeat these steps for your USB-C charging cable as well. Ensure the outlet you are using is working, use different cords in case the issue is with the cord, and try charging again. If the charging issue still persists, follow this simple guide to replace the USB-C module. | | | Before proceeding to the steps in this guide, be sure to power off your phone completely and prepare a clean, well lit workspace. We recommend having a small bag to put your parts in as you remove them, so nothing gets lost. The 3mm screws removed in step 4 will easily disappear due to their size. With all that said, happy fixing! | | Before using this guide to replace the headphone jack, be sure to check out the [link|https://www.ifixit.com/Wiki/Sony_Xperia_XA1_Troubleshooting|troubleshooting page|new_window=true] to ensure the speaker needs to be replaced. |
|