|
Introduction |
If your Skullcandy Hesh 3 headphones (model S6THW) are having battery issues with battery not being fully charged or insufficient battery life. Use, use this guide to help replace your battery. Before proceeding with this guide be sure to check for debris within the battery port. You can easily remove debris with a small dust blower or blowing into the port. Also be sure to make sure the micro-USB pins are aligned and still intact. You may do this by using a flashlight to inspect them. Before you decide to repair your device, make sure to power down the headphones completely and disconnect them from any external power source. In event of having a swollen battery within the headphones please consider reading this article on [[What to do with a swollen battery|Swollen batteries|new_window=true]] to know how to properly deal with one.
* Precaution IS necessary
* Soldering iron may reach temperatures of up to 480'C (896'F)
* For information on how to solder consider reading this page on [guide|750|How to solder and desolder|new_window=true]
* If first time soldering heat proof gloves may be necessary |
|