|
crwdns2866306:0crwdne2866306:0 |
|
|
Type |
|
|
Thing |
|
|
Title |
| Apple Watch - Series 8 Battery Replacement |
|
|
Introduction |
| Use this guide to replace a worn-out or dead battery in your Apple Watch Series 8. | | | ***Note: The battery replacement procedure for the 41 mm Series 8 Apple Watch differs slightly from the 45 mm version.*** This guide shows how to replace the battery for both sizes. | | | Before you begin, make sure you have the appropriate replacement battery for your watch. | | | If your battery is swollen, [[What to do with a swollen battery|take appropriate precautions|new_window=true]]. For your safety, ***discharge your battery below 25%*** before disassembling your device. This reduces the risk of fire if the battery is accidentally damaged during the repair. | | | This guide shows the procedure on the cellular/LTE version of the watch, but the GPS-only version is similar. | | | You’ll need ***replacement adhesive*** to reattach components when reassembling the device. |
|
|
Time Required Min |
crwdns2931287:030crwdne2931287:0
|
|
Time Required Max |
crwdns2931287:050crwdne2931287:0
|
|
Difficulty |
Moderate
|
|
Conclusion |
| If possible, turn on your device and test your repair before installing new adhesive and resealing. | | | ***To reassemble your device, follow these instructions in reverse order.*** | | | For optimal performance, [[Battery Calibration|calibrate your newly installed battery|new_window=true]] after completing this guide. | | | Take your e-waste to an [[E-Waste|R2 or e-Stewards certified recycler|new_window=true]]. | | | Repair didn’t go as planned? Try some [[Troubleshooting Problems After a Repair|basic troubleshooting|new_window=true]], or ask our [link|https://www.ifixit.com/Answers/Ask/Apple+Watch+-+Series+8|Answers community] for help. |
|
|
Author |
|
|
Public |
crwdns2853046:0crwdne2853046:0
|