crwdns2933423:0crwdne2933423:0

crwdns2944351:0crwdnd2944351:0Apple Watch – Series 8 Opening Procedurecrwdnd2944351:0crwdne2944351:0

crwdns2933797:0Dominik Schnabelrauchcrwdnd2933797:0crwdne2933797:0

crwdns2936043:0crwdne2936043:0 crwdns2933505:0crwdne2933505:0 Dominik Schnabelrauch

crwdns2933769:0crwdne2933769:0
crwdns2933771:0crwdne2933771:0
crwdns2933801:0crwdne2933801:0
crwdns2866306:0crwdne2866306:0
Apple Watch - Series 8
Type
technique
Title
Apple Watch Series 8 Opening Procedure
Introduction
Use this guide to open your Apple Watch Series 8 for repairs.
***Note: The opening procedure for the 41 mm and the 45 mm Apple Watch series 8 is the same. You can use this guide for both models.***
This guide shows the procedure on the cellular/LTE version of the watch, but the GPS-only version is similar.
You’ll need ***replacement adhesive*** to reattach components when reassembling the device.
Time Required Min
crwdns2931287:020crwdne2931287:0
Time Required Max
crwdns2931287:030crwdne2931287:0
Difficulty
Moderate
Conclusion
If possible, turn on your device and test your repair before installing new adhesive and resealing.
***To reassemble your device, follow these instructions in reverse order.***
During reassembly apply new adhesive where necessary after cleaning the relevant areas with isopropyl alcohol (>90%).
Take your e-waste to an [[E-Waste|R2 or e-Stewards certified recycler|new_window=true]].
Opening didn’t go as planned? Check out our [link|https://www.ifixit.com/Answers/Ask/Apple+Watch+-+Series+8|Answers community] for troubleshooting help.
Author
Public
crwdns2853046:0crwdne2853046:0

crwdns2943215:0crwdne2943215:0

  • iOpener x1 added.
  • iFixit Opening Picks (Set of 6) x1 added.
  • Isopropyl Alcohol (90% or Greater) x1 added.
  • iFixit Adhesive Remover x1 added.
  • Microfiber Cleaning Cloths x1 added.
  • Safety Glasses x1 added.
  • ESD Gloves x1 added.
  • Curved Razor Blade x1 added.
  • Heat Gun x1 added.

crwdns2935255:0crwdne2935255:0

  • In Progress added.