|
crwdns2866306:0crwdne2866306:0 |
|
|
Type |
|
|
Thing |
|
|
Title |
| iPhone 14 Taptic Engine Replacement |
|
|
Introduction |
| The Taptic Engine produces your iPhone's vibration and haptic feedback functions. Use this guide to remove and replace the Taptic Engine in an iPhone 14. | | | This guide was created using the ***A2882*** (international) model. If you're fixing a different iPhone 14 model, there may be some visual discrepancies, but the procedure should be the same. | | | ***For your safety, discharge the battery below 25% before disassembling your device.*** This reduces the risk of fire if the battery is accidentally damaged during the repair. If your battery is swollen, [[What to do with a swollen battery|take appropriate precautions|new_window=true]]. | | | You’ll need replacement adhesive to reattach the screen when reassembling the device. Your device will function normally, but will most likely lose its IP (Ingress Protection) rating. |
|
|
Time Required Min |
crwdns2931273:0crwdne2931273:0
|
|
Time Required Max |
crwdns2931273:0crwdne2931273:0
|
|
Difficulty |
Moderate
|
|
Conclusion |
| Compare your new replacement part to the original part—you may need to transfer remaining components or remove adhesive backings from the new part before installing. | | | ***To reassemble your device, follow these instructions in reverse order.*** | | | Take your e-waste to an [[E-Waste|R2 or e-Stewards certified recycler|new_window=true]]. | | | Repair didn’t go as planned? Try some [[Troubleshooting Problems After a Repair|basic troubleshooting]], or ask our [link|https://www.ifixit.com/Answers/Ask/iPhone+14|Answers community] for help. |
|
|
Author |
|
|
Public |
crwdns2853046:0crwdne2853046:0
|