|
crwdns2866306:0crwdne2866306:0 |
|
|
Type |
|
|
Thing |
|
|
Title |
| iPhone 14 Plus Screen Replacement |
|
|
Introduction |
| If your iPhone 14 Plus screen is cracked, not responding to touch, or not showing a picture when your phone is powered on, use this guide to restore your iPhone to working order with a new screen, a.k.a. display assembly. | | | This guide was created using the ***XXXX*** (international) model. If you're fixing a different iPhone 14 Plus model, there may be some visual discrepancies, but the procedure should be the same. | | | ***Note:*** True Tone and auto brightness functionality are disabled after a screen replacement, even when using an original Apple screen. Face ID is also disabled unless the iPhone runs iOS 15.2 or newer. | | | You’ll need replacement adhesive to reattach the screen when reassembling the device. Your device will function normally, but will most likely lose its IP (Ingress Protection) rating. |
|
|
Time Required Min |
crwdns2931289:01crwdne2931289:0
|
|
Time Required Max |
crwdns2931291:02crwdne2931291:0
|
|
Difficulty |
Moderate
|
|
Conclusion |
| If possible, turn on your device and test your repair before installing new adhesive and resealing. | | | ***To reassemble your device, follow these instructions in reverse order.*** | | | The best way to secure the new screen is to apply a sheet of custom-cut double-sided tape to the frame and place the screen back in its original position. | | | Take your e-waste to an [[E-Waste|R2 or e-Stewards certified recycler|new_window=true]]. | | | Repair didn’t go as planned? Try some [[Troubleshooting Problems After a Repair|basic troubleshooting]], or ask our [link|https://www.ifixit.com/Answers/Ask/iPhone+14+Plus|Answers community] for help. |
|
|
Author |
|
|
Public |
crwdns2853046:0crwdne2853046:0
|