|
crwdns2866306:0crwdne2866306:0 |
|
|
Type |
|
|
Thing |
|
|
Title |
| iPhone SE 2022 Wi-Fi Diversity Antenna Replacement |
|
|
Introduction |
| Use this guide to replace the Wi-Fi Diversity Antenna in the iPhone SE 2022. | | | This guide was performed on the ***A2783*** (international) model. | | | ***Note:*** This guide instructs you to fully detach and remove the display assembly; this is highly recommended for easier handling and to prevent damage to the display cables. If you feel comfortable removing the Wi-Fi Diversity Antenna while keeping the display cables attached, you can skip the steps for disconnecting the display. | | | If you do not replace the adhesive seals when reassembling, your device will function normally, but will most likely lose its water protection. | | | You’ll need replacement adhesive to reattach components when reassembling the device. |
|
|
Time Required Min |
crwdns2931273:0crwdne2931273:0
|
|
Time Required Max |
crwdns2931273:0crwdne2931273:0
|
|
Difficulty |
Moderate
|
|
Conclusion |
| If possible, turn on your device and test your repair before installing new adhesive and resealing. | | | Compare your new replacement part to the original part—you may need to transfer remaining components or remove adhesive backings from the new part before installing. | | | ***To reassemble your device, follow these instructions in reverse order.*** | | | Take your e-waste to an [[E-Waste|R2 or e-Stewards certified recycler|new_window=true]]. | | | Repair didn’t go as planned? Try some [[Troubleshooting Problems After a Repair|basic troubleshooting]], or ask our Answers community for help. |
|
|
Author |
|
|
Public |
crwdns2853046:0crwdne2853046:0
|