crwdns2933423:0crwdne2933423:0

crwdns2944351:0crwdnd2944351:0iPhone SE 2022 LCD and Digitizer Replacementcrwdnd2944351:0crwdne2944351:0

crwdns2933797:0Dominik Schnabelrauchcrwdnd2933797:0crwdne2933797:0

crwdns2936043:0crwdne2936043:0 crwdns2933505:0crwdne2933505:0 Dominik Schnabelrauch

crwdns2933769:0crwdne2933769:0
crwdns2933771:0crwdne2933771:0
crwdns2933801:0crwdne2933801:0
crwdns2866306:0crwdne2866306:0
iPhone SE 2022
Type
replacement
Thing
LCD and Digitizer
Title
iPhone SE 2022 LCD and Digitizer Replacement
Introduction
Use this guide to fix a cracked or broken screen by replacing just the bare front panel, a.k.a. LCD and digitizer assembly, in the iPhone SE 2022.
This guide was performed on the ***A2783*** (international) model.
If the frame is deformed, it's important to replace it to make sure the new screen will mount correctly and won’t suffer damage from uneven pressure
This guide shows how to replace ''only'' the iPhone SE 2022 LCD and digitizer assembly (a.k.a. the bare “front panel”). This requires you to transfer several components from your original screen to the new one before installing it—including the front-facing camera, earpiece speaker, LCD shield plate, and home button assembly.
***In order to maintain Touch ID functionallity it's important to carefully transfer the original home/Touch ID sensor onto the new display.*** The solid-state home button is paired to its original logic board by Apple, so replacing it will render it unusable.
If you do not replace the adhesive seals when reassembling, your device will function normally, but will most likely lose its water protection.
You’ll need replacement adhesive to reattach components when reassembling the device.
Time Required Min
crwdns2931273:0crwdne2931273:0
Time Required Max
crwdns2931273:0crwdne2931273:0
Difficulty
Moderate
Conclusion
If possible, turn on your device and test your repair before installing new adhesive and resealing.
***To reassemble your device, follow these instructions in reverse order.***
The best way to secure the new screen is to apply a sheet of custom-cut double-sided tape to the frame and place the screen back in its original position.
Take your e-waste to an [[E-Waste|R2 or e-Stewards certified recycler|new_window=true]].
Repair didn’t go as planned? Try some [[Troubleshooting Problems After a Repair|basic troubleshooting]], or ask our Answers community for help.
Author
Public
crwdns2853046:0crwdne2853046:0

crwdns2935255:0crwdne2935255:0

  • In Progress added.
  • Featured Guide added.