|
Introduction |
If the USB-C charging port of your PinePhone loses its functionality, you can replace it by using this guide. The primary tool required forCharging ports can become damaged from everyday use or obstructions pushed further into the device by the charging cord, but are easily fixed following this replacement is a Phillips #000 screwdriver head to unscrewguide.
Before beginning, inspect thescrews on the back inside of thePinePhone port and remove any debris inside.These screws should be handled carefully If the phone still refuses toavoid unintentionally stripping them charge, or only charges at certain angles, proceed. | | | Be very careful when removing the SD card as it is small and fragile. Although it is recommended to use a specialized pin key to remove the SD card, you can use a paper clip or other pin at your own risk. |
|