|
crwdns2866306:0crwdne2866306:0 |
|
|
Type |
|
|
Thing |
|
|
Title |
| Huawei P20 LCD Screen & Digitizer Replacement |
|
|
Introduction |
| Use this guide to replace a broken or defective LCD Screen & Digitizer in your Huawei P20. | | | Due to the phone’s design, you must remove the lithium-ion battery to access the display cables. '''Reusing a deformed battery after it has forcefully been removed, is a potential safety hazard. In this case, replace it with a new battery.''' | | | '''Before disassembling your phone, discharge the battery below 25%'''. The battery can catch fire and/or explode if accidentally punctured, but the chances of that happening are much lower if discharged. | | | '''Note''': This guide instructs you to replace only the screen while leaving the original frame and motherboard in place. However, some replacement screens for this phone come pre-installed in a new frame (a.k.a. chassis), which requires a very different procedure. Make sure you have the correct part before starting this guide. | | | You’ll need '''replacement adhesive''' to reattach components when reassembling the device. |
|
|
Time Required Min |
crwdns2931289:01crwdne2931289:0
|
|
Time Required Max |
crwdns2931291:02crwdne2931291:0
|
|
Difficulty |
Moderate
|
|
Conclusion |
| If possible, turn on your phone and '''test your repair''' before installing new adhesive and resealing the phone. | | | To reassemble your device, follow these instructions in reverse order. | | | The best way to secure the new screen is with a sheet of [guide|113604|custom-cut double-sided tape]. Apply the tape to the back of the screen, then carefully feed the display cable through the frame. Align the screen and press it into place. | | | Take your e-waste to an [[E-Waste|R2 or e-Stewards certified recycler]]. | | | Repair didn’t go as planned? Check out our Answers community for troubleshooting help. |
|
|
Author |
|
|
Public |
crwdns2853046:0crwdne2853046:0
|