crwdns2933423:0crwdne2933423:0

crwdns2944351:0crwdnd2944351:0Huawei Honor 8 Battery Replacementcrwdnd2944351:0crwdne2944351:0

crwdns2933797:0Dominik Schnabelrauchcrwdnd2933797:0crwdne2933797:0

crwdns2936043:0crwdne2936043:0 crwdns2933505:0crwdne2933505:0 Dominik Schnabelrauch

crwdns2933769:0crwdne2933769:0
crwdns2933771:0crwdne2933771:0
crwdns2933801:0crwdne2933801:0
crwdns2866306:0crwdne2866306:0
Huawei Honor 8
Type
replacement
Thing
Battery
Title
Huawei Honor 8 Battery Replacement
Introduction
Use this guide to replace a worn-out or dead battery in your Honor 8.
If your battery is swollen, [[What to do with a swollen battery|take appropriate precautions|new_window=true]]. For your safety, discharge your battery below 25% before disassembling your phone. This reduces the risk of a dangerous thermal event if the battery is accidentally damaged during the repair.
Although it’s possible to remove the battery without removing the loudspeaker unit and the interconnect flex cable, we recommend doing so to make the removal procedure easier and to prevent damage to the interconnect flex cable.
You’ll need replacement adhesive to reattach components when reassembling the device.
Time Required Min
crwdns2931287:045crwdne2931287:0
Time Required Max
crwdns2931289:01crwdne2931289:0
Imageid
crwdns2933769:0crwdne2933769:0
crwdns2933771:0crwdne2933771:0
Difficulty
Moderate
Conclusion
'''If possible''', turn on your phone and '''test your repair''' before installing new adhesive and resealing the phone.
'''Secure the new battery''' with pre-cut adhesive or double-sided adhesive tape. In order to position it correctly, apply the new adhesive into the phone at the places where the old adhesive was located, not directly onto the battery. Press the new battery firmly into place.
For optimal performance, '''[[Battery Calibration|calibrate]] your newly installed battery''': Charge it to 100%, and keep charging it for at least two more hours. Then, use it until it shuts off due to low battery. Finally, charge it uninterrupted to 100%
Take your e-waste to an [[E-Waste|R2 or e-Stewards certified recycler|new_window=true]].
To reassemble your device, follow these instructions in reverse order.
Repair didn’t go as planned? Check out our Answers community for troubleshooting help.
Author
Public
crwdns2853046:0crwdne2853046:0

crwdns2933809:0crwdne2933809:0

crwdns2943215:0crwdne2943215:0

  • iOpener x1 added.
  • iFixit Opening Picks (Set of 6) x1 added.
  • Suction Handle x1 added.
  • Phillips #00 Screwdriver x1 added.
  • Spudger x1 added.
  • Plastic Cards x1 added.

crwdns2935255:0crwdne2935255:0

  • In Progress added.

crwdns2933623:0crwdne2933623:0

crwdns2933815:01crwdne2933815:0
crwdns2933769:0crwdne2933769:0
crwdns2933771:0crwdne2933771:0
crwdns2933815:02crwdne2933815:0
crwdns2933769:0crwdne2933769:0
crwdns2933771:0crwdne2933771:0
crwdns2933815:03crwdne2933815:0
crwdns2933769:0crwdne2933769:0
crwdns2933771:0crwdne2933771:0
crwdns2933815:04crwdne2933815:0
crwdns2933769:0crwdne2933769:0
crwdns2933771:0crwdne2933771:0
crwdns2933815:05crwdne2933815:0
crwdns2933769:0crwdne2933769:0
crwdns2933771:0crwdne2933771:0
crwdns2933815:06crwdne2933815:0
crwdns2933769:0crwdne2933769:0
crwdns2933771:0crwdne2933771:0