|
crwdns2866306:0crwdne2866306:0 |
| Motorola Moto E4 Plus (XT1771) |
|
|
Type |
|
|
Thing |
|
|
Title |
| Motorola Moto E4 Plus (XT1771) Display Replacement |
|
|
Introduction |
| Use this guide to remove the display in the Motorola Moto E4 Plus (XT1771). | | | Before disassembling your phone, discharge the battery below 25%. The battery can catch fire and/or explode if accidentally punctured, but the chances of that happening are much lower if discharged. | | | This guide instructs you to replace only the display while leaving the original frame, motherboard, and battery in place. However, some replacement screens for this phone come pre-installed in a new frame (a.k.a. chassis), which requires a very different procedure—transplanting your phone's internals and installing a new battery. Make sure you have the correct part before starting this guide. | | | You’ll need replacement adhesive to reattach components during reassembly. |
|
|
Time Required Min |
crwdns2931287:045crwdne2931287:0
|
|
Time Required Max |
crwdns2931289:01crwdne2931289:0
|
|
Difficulty |
Moderate
|
|
Conclusion |
| The best way to secure the new screen is with a sheet of custom-cut double-sided tape. Apply the tape to the back of the screen, then carefully feed the display cable through the frame. Align the screen and press it into place. | | | To reassemble your device, follow these instructions in reverse order. | | | If possible, turn on your phone and test your repair before installing new adhesive and resealing the phone. | | | Take your e-waste to an [[E-Waste|R2 or e-Stewards certified recycler]]. |
|
|
Author |
|
|
Public |
crwdns2853046:0crwdne2853046:0
|