crwdns2915892:0crwdne2915892:0
If the device doesn't rotate, the motor could be bad. Use this guide to replace it.
crwdns2942213:0crwdne2942213:0
-
-
Unscrew the locking sleeve.
-
-
-
While pressing the spindle lock button, unscrew the collet nut and remove it along with the brass collet.
-
-
-
-
To remove the front panel, pry the device apart while holding the device with the other hand.
-
-
-
Remove the connected wiring from the circuit board.
-
-
-
Remove the single 4mm screw retaining the circuit board.
-
-
-
Gently pry the circuit board from the back piece.
-
-
-
Gently pull motor assembly out of the panel.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
crwdns2947410:01crwdne2947410:0
All very well and good, but it’s impossible to buy the motor parts to replace…