crwdns2915892:0crwdne2915892:0
Use this guide to replace the refrigerator thermistor or temperature sensor in your Whirlpool WRS315SDHW Refrigerator.
The refrigerator thermistor measures the air temperature in your refrigerator and signals temperature regulatory processes. If your refrigerator doesn't cool properly, your refrigerator thermistor might be broken.
To replace the freezer thermistor, follow this guide instead.
Note: Some photos show the doors removed for clarity purposes. Removing them is not required and will not change the procedure.
crwdns2942213:0crwdne2942213:0
-
-
Turn off your main water supply
-
Unplug your device
-
-
-
Depending on your repair, open one or both doors.
-
-
-
Use a 1/4 inch socket wrench, or a flathead screwdriver, to remove the 22.3 mm-long screw securing the temperature control board assembly (shown with the assembly removed).
-
-
-
-
Pull the temperature control board assembly off its slot in the chassis.
-
Let the assembly hang to access its connectors.
-
-
-
Disconnect the two harness connectors attached to the temperature control board assembly.
-
-
-
Remove the temperature control board assembly.
-
-
-
Pinch and pull the connector attached to the thermistor to disconnect it.
-
-
-
Use a flathead screwdriver, or a similar tool, to pry up the thermistor from its slot in the chassis.
-
Remove the thermistor.
-
To reassemble your device, follow these instructions in reverse order.
Take your e-waste to an R2 or e-Stewards certified recycler.
Repair didn’t go as planned? Ask our Answers community for help.
To reassemble your device, follow these instructions in reverse order.
Take your e-waste to an R2 or e-Stewards certified recycler.
Repair didn’t go as planned? Ask our Answers community for help.
crwdns2935221:0crwdne2935221:0
crwdns2935227:0crwdne2935227:0
crwdns2915084:0crwdne2915084:0
Global Fixers crwdns2935289:0Global Fixerscrwdne2935289:0
Community
crwdns2931471:033crwdne2931471:0
crwdns2935297:0574crwdne2935297:0
