crwdns2943259:0crwdnd2943259:0crwdnd2943259:0crwdnd2943259:0crwdne2943259:0
crwdns2915892:0crwdne2915892:0
Applicable to H4D and H4Bt engines (M281 E10 and M281 E09)
It is advisable to do this operation on a cold engine.
Recommendations :
Replace every: 60,000km/4 years (Iridium) or 20,000km (Copper/Nickel).
Electrode gap: 0.8mm (varies depending on the spark plug model considered)
H4Bt: Iridium spark plugs mandatory.
H4D: you may favor Iridium spark plugs if using E85.
See Wiki for more info.
crwdns2942213:0crwdne2942213:0
-
-
Open the trunk.
-
Put aside the trunk carpets.
-
-
-
Unscrew the 6 T50 screws by hand or using a wrench and a socket.
-
Lift and put aside the engine hood.
-
-
-
-
Disconnect and put aside the oil vapors duct.
-
Disconnect the ignition coils' connector.
-
Unscrew each 8mm bolts of the 3 ignition coils.
-
Gently extract the ignition coils.
-
-
-
Unscrew and extract the spark plugs using a 14mm spark plug socket.
-
-
-
Torque the new spark plug using a 14mm spark plug socket at 24 N.m.
-
-
-
Put back the ignition coils on the spark plugs.
-
Torque each of the 3 ignition coils' 8mm bolts at 10 N.m.
-
Reconnect the ignition coil's connectors.
-
Congratulations ! You replaced you spark plugs/ignition coils !
Congratulations ! You replaced you spark plugs/ignition coils !
crwdns2935221:0crwdne2935221:0
crwdns2935229:08crwdne2935229:0
crwdns2934873:0crwdne2934873:0
35%
crwdns2934883:0AntonioTwingocrwdne2934883:0 crwdns2934875:0crwdne2934875:0
crwdns2934877:0crwdne2934877:0 ›
crwdns2947412:02crwdne2947412:0
Coucou Antonio, recois-tu mes mails ?
Coucou, je reçois bien tes mails à l'adresse suivante:
antoniotwingo@proton.me