crwdns2942213:0crwdne2942213:0
-
-
Begin removing the 3/16" screws for the device.
-
-
-
Turn the device and remove the additional 3/16" screws.
-
-
-
Turn the device and remove the additional 3/16" screw.
-
-
-
-
Using the plastic opening tools, pry open the camera from the bottom.
-
-
-
Gently pull the connector away from the motherboard.
Help! I can't get this connector back in place! How did you do it?
Thanks!
Got it finally - and it's working again, I can't believe it! Thank you so much for the instructions!!!!
-
-
-
Unscrew the motherboard's screws. There are 4 3/32" screws and 3 5/32" screws.
-
-
-
Unscrew the lens' screws. There are 1 black 4/32" screw, 3 3/16" black screws, and 2 white 5/32" screws.
This seems to be wrong. Only 2 screws connect the lens to the camera body - if you unscrew the others, you open up the lens and there is no need to do so.
-
-
-
Pull these connectors away from motherboard.
-
-
-
Lift the motherboard and lens out of the case.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
crwdns2935221:0crwdne2935221:0
crwdns2935229:010crwdne2935229:0
crwdns2947410:01crwdne2947410:0
Hey mate, what do you do after the motherboard replacement? Just turn the camera on? Do you need to do a master reset?