crwdns2915892:0crwdne2915892:0
The PDP Rematch's vibration motors should be replaced if they are damaged and stopped working. To access the vibration motors, separate the front housing shell and the back shell of the controller.
crwdns2942213:0crwdne2942213:0
-
-
Orient the controller so the back side is facing up.
-
Use a Phillips #000 screwdriver to remove the seven 9 mm screws that secure the back shell.
-
-
-
Pull apart the controller's front and back shell with moderate force.
-
-
-
-
Use a soldering iron to desolder the two wires connecting the vibration motor to the motherboard.
-
-
-
Grab the motor and pull away from the back shell to remove the vibration motor.
-
To reassemble your device, follow the above steps in reverse order.
Take your e-waste to an R2 or e-Stewards certified recycler.
Repair didn’t go as planned? Try some basic troubleshooting or ask our Answers community for help.
To reassemble your device, follow the above steps in reverse order.
Take your e-waste to an R2 or e-Stewards certified recycler.
Repair didn’t go as planned? Try some basic troubleshooting or ask our Answers community for help.
crwdns2935221:0crwdne2935221:0
crwdns2935227:0crwdne2935227:0