crwdns2915892:0crwdne2915892:0
Follow these steps to replace the motherboard. The prerequisites are required to unsolder the items attached to it. You can simply unclip other items yourself, though.
crwdns2942213:0crwdne2942213:0
-
-
Place the flat end of a nylon spudger in the gap between the cover and the rest of the device.
-
Slide the spudger down each side until you hear numerous clicks.
-
Remove the back panel from the tablet.
-
-
-
Carefully remove any pieces of electrical tape that may be adhered to the battery.
-
-
-
Desolder the battery carefully from the motherboard.
-
For help with soldering, visit iFixit's How to Solder and Desolder Connections guide.
-
-
-
-
Gently peel the battery from the front case.
-
-
-
Desolder the black and red wires from the motherboard.
-
-
-
Pry the speakers from the casing using a nylon spudger.
-
-
-
Disconnect each ribbon cable from their respective clips on the motherboard.
-
-
-
Remove the four 4.8 mm screws from the motherboard using a JIS #000 screwdriver.
-
-
-
Remove the motherboard from the tablet.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
crwdns2915084:0crwdne2915084:0
UMass Dartmouth, Team 7-1, Ryckebusch Spring 2023 crwdns2935289:0UMass Dartmouth, Team 7-1, Ryckebusch Spring 2023crwdne2935289:0
UMASSD-RYCKEBUSCH-S23S7G1
crwdns2931471:03crwdne2931471:0
crwdns2935297:06crwdne2935297:0
