crwdns2915892:0crwdne2915892:0
pre req only
crwdns2942213:0crwdne2942213:0
-
-
Use an iOpener to loosen the adhesive beneath the rear facing camera. Place the iOpener across the top part of the phone for about 30 seconds.
-
-
-
Apply the flat end of a spudger to the left side of the rear facing camera and carefully lever it up. Make sure all of the adhesive underneath is loosened.
-
-
-
-
Use the flat end of a spudger to pry up the display flex connector.
-
-
-
Grip the lower part of the motherboard with your fingers and carefully lift it upwards.
-
Gently pull the motherboard towards the bottom edge to free it from the plastic clip next to the rear-facing camera.
-
Carefully lift the motherboard out of the frame.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
