crwdns2915892:0crwdne2915892:0
Replacing the base plate for your Nest couldn't be easier. The only tool required is a Phillips #2 screwdriver
crwdns2942213:0crwdne2942213:0
-
-
Grasp the display's outer ring with your fingers and pull directly away while rotating clockwise to remove the thermostat from the wall.
-
Go to the electrical panel and turn off the circuit to make sure no power is running to the thermostat.
-
Once the power is off, disconnect the Y1, G, R, W1, C, and OB wires.
-
-
-
-
Remove the two 1 ¼” drywall screws holding the base display and base plate in the wall using a Phillips #2 screwdriver.
-
Remove the base plate and base display.
-
-
-
Pry the base display off of the baseplate using an iFixit opening tool.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
crwdns2947410:01crwdne2947410:0
Any recommendations on where to get 2nd and 3rd gen base plates. Both burned by lightning...