crwdns2915892:0crwdne2915892:0
Motherboard Assembly prereq
crwdns2942213:0crwdne2942213:0
-
-
Remove the two 2.9 mm Phillips screws.
-
-
crwdns2935267:0crwdne2935267:0Tweezers$4.99
-
Use the edge of a spudger to pry up the flap of the ZIF connector located below the SIM slot on the left side of the motherboard.
-
Use a pair of tweezers to pull the power and volume button flex cable out of the ZIF connector.
-
-
-
-
Use a pair of tweezers to pry up and disconnect the antenna cable.
-
-
-
Use the flat end of a spudger to pry up and disconnect the interconnect flex cable.
-
-
-
Use the tip of a spudger or an opening pick to pry up the flap of the ZIF connector, located in the bottom right corner of the motherboard.
-
Use a pair of tweezers to pull the display flex cable out of the ZIF connector.
-
-
-
Grasp the motherboard by the top corners and remove it by lifting up and pulling it carefully out of its recess.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.