crwdns2915892:0crwdne2915892:0
Motherboard Cover prereq only
crwdns2942213:0crwdne2942213:0
-
-
Insert a thumbnail, or spudger, into the notch on the bottom right to start separating the phone unit from the back cover.
-
Move to the bottom left corner and pry the phone unit out of the back cover until you can get a good grip.
-
-
-
Lift the phone out of the back cover.
-
-
-
-
Use a spudger or fingernail to lift the battery starting at the notch on the bottom left.
-
Lever the battery out of its recess and remove it.
-
-
-
Remove the five 3.1 mm long Phillips #00 screws.
-
-
-
Apply an opening pick to the bottom right corner of the motherboard cover.
-
Twist the opening pick to free the motherboard cover out of the plastic clamps on the right side of the phone.
-
-
-
Repeat the previous step on the left side of the motherboard cover to free it out of the plastic clamps.
-
Pry up the motherboard cover until you can get a good grip.
-
Remove the motherboard cover.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
