crwdns2915892:0crwdne2915892:0
Remove the daughterboard cover to take out the daughterboard.
crwdns2942213:0crwdne2942213:0
-
-
Insert a thumbnail, or spudger, into the notch on the bottom right corner to start separating the phone unit from the back cover.
-
Move it to the bottom left corner and pry the phone unit out of the back cover until you can get a good grip.
-
-
-
Lift the phone out of the back cover.
-
-
-
-
Use a finger or spudger to lever the battery out of its recess and remove it.
-
-
-
Remove the four 3.5 mm long Torx T5 screws.
-
-
-
Apply the edge of an opening pick to the bottom right corner under the daughterboard cover.
-
Twist the opening pick to open the plastic clamps of the daughterboard cover.
-
Slide the opening pick to the left and pry it upwards until you can get a good grip on the daughterboard cover.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
