crwdns2942213:0crwdne2942213:0
-
-
Pry open both the right earpad and left earpad carefully with your hands.
-
-
-
On the left speaker housing, remove the four 4.5 mm screws with a T3 Torx screwdriver.
-
Remove the single 3.3 mm Phillips #00 screw.
-
-
-
-
Remove plastic cover from the microphone hinge with your hands and clean any debris with a microfiber cloth.
-
-
-
Desolder the microphone connection from the PCB.
-
Remove the microphone.
-
-
-
Remove the two 4.5 mm Phillips screws that secure the motherboard.
-
To reassemble your device, follow the above steps in reverse order.
Take your e-waste to an R2 or e-Stewards certified recycler.
Repair didn’t go as planned? Try some basic troubleshooting or ask our Answers community for help.
To reassemble your device, follow the above steps in reverse order.
Take your e-waste to an R2 or e-Stewards certified recycler.
Repair didn’t go as planned? Try some basic troubleshooting or ask our Answers community for help.