crwdns2915892:0crwdne2915892:0
Follow this guide to open a Logitech VX Nano wireless mouse for cleaning or repair.
Opening your mouse gives you access to clean its internals, troubleshoot mechanical problems, or replace a part.
crwdns2942213:0crwdne2942213:0
-
-
Pull down on the battery release tab to remove the battery cover.
-
Remove battery cover.
-
-
-
Pull the battery release tab away from the mouse so the two AA batteries come out.
-
-
-
If the Nano Receiver is still in the mouse and not in your computer, remove it by pushing on the bright orange button. It should pop right out!
-
-
-
-
Find and remove the screws at the bottom of the battery compartment:
-
Two 6 mm Phillips #1 screws
-
-
-
Use an opening pick to get underneath the corner of one of the adhesive skates.
-
Continue to push the opening pick between the adhesive and the mouse case, slowly working the adhesive away from the case.
-
Repeat this same process for the two other skates.
-
-
-
Remove the screws from the backside of the mouse:
-
Three 6 mm Phillips #1 screws
-
-
-
Carefully separate the top plastic shell from the bottom case.
-
Remove the top shell.
-
To reassemble your device, follow these instructions in reverse order.
Repair didn’t go as planned? Try some basic troubleshooting, or ask our Answers community for help.
Reuse or Recycle—Never put discarded electronic parts in household waste. Visit Logitech Recycling to find your nearest recycling points, including the option to mail back old devices to Logitech for free if there’s no convenient solution in your area. You can also take your e-waste to any R2 or e-Stewards certified recycler. And don’t let good working parts or repaired devices die a slow death in your sock drawer—pass them along to someone who can use them.
Share your experience—Leave a comment here or send your feedback directly to Logitech at repair@logitech.com to help shape future repair guides and product design.
