crwdns2915892:0crwdne2915892:0
This guide will demonstrate how to open the back cover panel of a ThinkPad X395. Use this guide to access the internals of the laptop before performing any maintenance or repairs.
crwdns2942213:0crwdne2942213:0
-
-
Use a Phillips #1 screwdriver to fully loosen the five screws on the back cover.
-
-
-
Orient your laptop so that the screen's silver hinges are closest to you.
-
Insert an opening pick between the back cover and the device body near a hinge corner.
-
Pry upward to release the retaining clips. Listen for a loud click when each clip releases.
-
-
-
-
Insert the opening pick between the back cover and the device body at the other hinge corner.
-
Pry upward on the cover to release additional clips.
-
-
-
Lift and remove the cover up from the laptop, starting with the edge nearest to you.
-
Shift the cover side to side if the center clip feels stuck.
-
To reassemble your device, follow these instructions in reverse order.
Take your e-waste to an R2 or e-Stewards certified recycler.
Repair didn’t go as planned? Try some basic troubleshooting, or ask our Lenovo ThinkPad answers community for help.
To reassemble your device, follow these instructions in reverse order.
Take your e-waste to an R2 or e-Stewards certified recycler.
Repair didn’t go as planned? Try some basic troubleshooting, or ask our Lenovo ThinkPad answers community for help.
