crwdns2942213:0crwdne2942213:0
-
-
Use a Phillips #0 screwdriver to remove the five screws on the base cover.
-
-
-
Insert a plastic opening tool between the base cover and the chassis.
-
Slide the tool along the perimeter of the case and push down as you go to release the base cover.
-
Lift the base cover up and off.
-
-
-
Use tweezers to grip the battery's motherboard plug, and pull the plug directly out of its port.
-
-
-
Use a Phillips #0 screwdriver to remove the four 5.2 mm screws securing the battery.
-
-
-
-
Lift the battery up and out of its housing.
-
-
-
Remove the four 5.2 mm screws from the fan using the Phillips #0 screwdriver.
-
Use tweezers to carefully unplug the fan ribbon cable.
-
-
-
Remove the eleven 5.2 mm screws from the motherboard using a Phillips #0 screwdriver.
-
-
-
Use tweezers to carefully unplug the four motherboard ribbon cables.
-
-
-
Use tweezers to carefully unplug the black and red harness cables.
-
-
-
Carefully lift the motherboard up and out.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.