crwdns2915892:0crwdne2915892:0
Follow this guide if you wish to replace the CMOS battery on your Lenovo ThinkPad X1 Carbon 5th Gen, Type 20K3-S0DQ00 S/N PF-0VPYSA 1710. This will be a fairly simple guide and should be quick for most users. Having a proper a CMOS battery allows for the laptop to be used without being connected to a power source.
The device should be powered off and disconnected from the charger when being worked on.
crwdns2942213:0crwdne2942213:0
-
-
Turn the laptop on to its back.
-
-
-
Use the Phillips #1 screwdriver to remove five 1.2 mm screws from the back cover of the laptop.
-
-
-
Remove the back cover using the opening tool, leaving the laptop back exposed.
-
Use the opening tool to pry the edge and work your way around the perimeter.
-
-
-
-
Use the Phillips #1 screwdriver to remove the four 1.2 mm screws that secure the battery.
-
-
-
Remove the battery using your hand or a prying tool.
Faire attention à certain modèle ayant un adaptateur WWAN Sierra, les câbles d'antenne passent autour de la batterie, l'antenne principale (main) passe vers la gauche (câble orange/rouge) et l'auxiliaire (aux) passe à droite (câble bleu).
Veillez à les déconnecter et de les détourer délicatement de la batterie. En effet, ceux-ci passent par la batterie sur les rebords, et l'on risque de les arracher accidentellement.
En dehors de cela, la procédure reste la même.
-
-
-
Once the battery is removed the CMOS battery will be exposed.
-
-
-
Disconnect the CMOS cable from the socket on the motherboard.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
crwdns2935221:0crwdne2935221:0
crwdns2935227:0crwdne2935227:0
crwdns2947410:01crwdne2947410:0
Thank you for was cristal clear instructions :-)