Lenovo Tab 2 A8 Motherboard Replacement

crwdns2931653:01crwdne2931653:0 Removing the Back Panel


crwdns2935267:0crwdne2935267:0
Tweezers
$4.99
crwdns2945778:0crwdne2945778:0



• Place the tablet face down on a soft, stable surface that will protect the screen.
• Next, Scrape off the seal over the screw in the back of the tablet with a Metal Spudger.
• Use the Phillips #000 Screwdriver to remove the M1.4 × 2.5 screw.
• If the seal covering the screw has already been removed, please proceed to the next step in the process.
• As the screw is small, you may wish to extract it using a pair of tweezers.
crwdns2913378:0crwdne2913378:0
crwdns2934285:0crwdne2934285:0
crwdns2934285:0crwdne2934285:0
crwdns2917038:0crwdne2917038:0
1024
crwdns2891542:0crwdne2891542:0 crwdns2934287:0crwdne2934287:0
crwdns2931653:02crwdne2931653:0




• Starting on the side, work your way around the the tablet to pop off the back cover. You will want to utilize a metal Spudger for this.
• Some force may be required initially to pry the back cover off.
• Note that the button tabs for this device are loose inside the case and will fall out when opening.
crwdns2913378:0crwdne2913378:0
crwdns2934285:0crwdne2934285:0
crwdns2934285:0crwdne2934285:0
crwdns2917038:0crwdne2917038:0
1024
crwdns2891542:0crwdne2891542:0 crwdns2934287:0crwdne2934287:0
crwdns2931653:03crwdne2931653:0 Motherboard

crwdns2935267:0crwdne2935267:0
Tweezers
$4.99
crwdns2945778:0crwdne2945778:0
• Using the Phillips #000 screwdriver, remove the four M1.4 × 2.5 screws holding the motherboard in place.
• Because the screws are small, it is a good idea to remove them with a pair of tweezers.
crwdns2913378:0crwdne2913378:0
crwdns2934285:0crwdne2934285:0
crwdns2934285:0crwdne2934285:0
crwdns2917038:0crwdne2917038:0
1024
crwdns2891542:0crwdne2891542:0 crwdns2934287:0crwdne2934287:0
crwdns2931653:04crwdne2931653:0
• Remove the M1.4 × 2.5 screw securing the battery lead to the battery with the Phillips #000 screwdriver.
• With a pair of tweezers, gently move the battery lead so it will not obstruct the motherboard.
• With a pair of tweezers, carefully unplug the strip connecting the screen to the motherboard.
• The strip connecting the screen to the motherboard is firmly in place and may require some careful use of strength to unplug it.
crwdns2913378:0crwdne2913378:0
crwdns2934285:0crwdne2934285:0
crwdns2934285:0crwdne2934285:0
crwdns2917038:0crwdne2917038:0
1024
crwdns2891542:0crwdne2891542:0 crwdns2934287:0crwdne2934287:0
crwdns2931653:05crwdne2931653:0
• Remove the motherboard by lifting the top edge and pulling outward to free it from the small tabs that hold it in place.
• The small tabs can be broken if the motherboard is pried up too forcefully.
• The button tabs are fastened to the motherboard by a small adhesive strip. Take care in removing the motherboard to avoid tearing the wires.
crwdns2913378:0crwdne2913378:0
crwdns2934285:0crwdne2934285:0
crwdns2934285:0crwdne2934285:0
crwdns2917038:0crwdne2917038:0
1024
crwdns2891542:0crwdne2891542:0 crwdns2934287:0crwdne2934287:0

crwdns2862417:0crwdne2862417:0

crwdns2935293:0crwdnd2935293:05crwdnd2935293:0crwdne2935293:0

James Bailey

crwdns2935283:010/06/15crwdne2935283:0

590 crwdns2915208:0crwdne2915208:0

crwdns2935297:03crwdne2935297:0

crwdns2918514:0crwdne2918514:0: 12

• 
• 
• 

crwdns2935301:09crwdne2935301:0

crwdns2915084:0crwdne2915084:0

Eastern Washington University, Team 2-4, Plummer Fall 2015 crwdns2935289:0Eastern Washington University, Team 2-4, Plummer Fall 2015crwdne2935289:0

EWU-PLUMMER-F15S2G4

crwdns2931471:04crwdne2931471:0

crwdns2935297:013crwdne2935297:0

crwdns2942557:0crwdne2942557:0

crwdns2942955:0crwdne2942955:0

crwdns2852917:0crwdne2852917:0