crwdns2915892:0crwdne2915892:0
If your Lenovo’s Ideapad Flex 4 battery cannot hold a charge, and your laptop dies if not plugged in, use this guide to replace your battery.
crwdns2942213:0crwdne2942213:0
-
-
Remove the nine 6 mm screws using a T5 Torx Screwdriver.
-
Remove the two 10 mm screws using a T5 Torx Screwdriver.
-
-
-
-
Use a plastic opening tool to carefully pry off the back cover.
-
Remove the back cover.
-
-
-
Disconnect the battery by using a plastic opening tool or your fingers to push the connector towards the battery.
-
-
-
Remove the three 4 mm screws using a T5 Torx Screwdriver.
-
To reassemble your device, follow these instructions in reverse order.
Take your e-waste to an R2 or e-Stewards certified recycler.
To reassemble your device, follow these instructions in reverse order.
Take your e-waste to an R2 or e-Stewards certified recycler.
crwdns2935221:0crwdne2935221:0
crwdns2935229:02crwdne2935229:0