crwdns2915892:0crwdne2915892:0
The Wi-Fi card, or wireless module, is what makes the laptop connect to a wireless network connection. A faulty Wi-Fi card can cause a unstable internet connection which means it needs to be replaced. Following this guide will show you how to replace a faulty Wi-Fi card (or upgrade to a newer one). In this guide you will be needing a Phillips #0 screwdriver, a plastic pick and a spudger.
This will take only a few minutes to complete and make sure to save any unfinished work as you will need to power down the laptop before you can begin.
crwdns2942213:0crwdne2942213:0
-
-
Place the device on a flat surface with the lower case facing up.
-
Use a Phillips #0 screwdriver to remove the ten 3 mm Phillip screws that secure the lower case.
-
-
-
Insert an opening tool in the gap between the lower case and chassis.
-
Pry around the entire perimeter of the lower case until it fully releases.
-
Remove the lower case.
-
-
-
-
Unscrew the 3 mm Phillips screw that secures the Wi-Fi card.
-
-
-
Use a plastic spudger to gently lift and disconnect the two antenna cables.
-
Grip the left edge of the card and pull it directly out of its socket.
-
To reassemble your device, follow the above steps in reverse order.
Take your e-waste to an R2 or e-Stewards certified recycler.
To reassemble your device, follow the above steps in reverse order.
Take your e-waste to an R2 or e-Stewards certified recycler.
crwdns2915084:0crwdne2915084:0
Gateway, Team 8-1, Gonzalez Fall 2024 crwdns2935289:0Gateway, Team 8-1, Gonzalez Fall 2024crwdne2935289:0
GCC-GONZALEZ-F24S8G1
crwdns2931471:04crwdne2931471:0
crwdns2935297:03crwdne2935297:0
