crwdns2915892:0crwdne2915892:0
This guide will show the steps needed to take out and replace the speakers in the Lenovo Chromebook 100e 2nd gen. The tools required for this guide are a Phillips head screwdriver and a plastic pick.
crwdns2942213:0crwdne2942213:0
-
-
Remove the nine 6 mm screws from the back of the laptop using a Phillips #0 screwdriver.
-
-
-
Open the laptop and lay it flat.
-
Go along the edge of the keyboard with an opening tool until it pops loose.
-
-
-
-
Lift the keyboard connectors up using an opening pick.
-
Remove the connectors from their sockets.
-
-
-
Using an opening pick, disconnect the speakers from the headphone jack.
-
-
-
Remove the two 2 mm Phillips #0 screws holding both of the speakers in.
-
-
-
The speakers are now loose and can be removed from the laptop.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.