crwdns2915892:0crwdne2915892:0
Use this guide to replace the Limit Switch that tells the Keurig that the K-Cup section is closed.
crwdns2942213:0crwdne2942213:0
-
-
Open the K-Cup Holder by lifting the handle.
-
-
-
While looking upwards from underneath the Keurig, remove the two 8mm Phillips #2 screws from underneath the black plastic "shroud".
-
-
-
-
Remove the black plastic "shroud" by pushing inwards and then pulling upwards to disengage the plastic hooks that are not visible.
-
-
-
Remove the two 10mm Phillips #1 screws from the switch.
-
-
-
Remove the switch by cuting the two connecting wires. Reconnect a replacement switch using this guide to join wires with solder, or using this guide to solder connections, or by using any other technique to connect wires.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
crwdns2935221:0crwdne2935221:0
crwdns2935229:02crwdne2935229:0
crwdns2915084:0crwdne2915084:0
Cal Poly, Team 20-4, Livingston Fall 2016 crwdns2935289:0Cal Poly, Team 20-4, Livingston Fall 2016crwdne2935289:0
CPSU-LIVINGSTON-F16S20G4
crwdns2931471:04crwdne2931471:0
crwdns2935297:05crwdne2935297:0
