crwdns2915892:0crwdne2915892:0
Use this guide to replace the headphone jack in your Huawei P9 Lite.
crwdns2942213:0crwdne2942213:0
-
-
Use an opening pick to unclip the rear cover, starting from the bottom corner.
-
Work your way around counterclockwise and carefully pry the plastic tabs open one by one.
-
-
-
Twist the opening pick to lever the back cover away and loosen it from the adhesive.
-
-
-
-
When the back cover is freed from the adhesive you can pop it off by hand completely.
-
-
-
Remove the nine Phillips #00 screws that secure the metal shield plate.
-
-
-
Use a spudger to disconnect the fingerprint sensor from the motherboard.
-
Peel the NFC antenna cable off of the metal plate.
-
-
-
Disconnect the headphone jack with a spudger.
-
Take the headphone jack out of its recess.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
crwdns2935221:0crwdne2935221:0
crwdns2935229:08crwdne2935229:0
crwdns2947410:01crwdne2947410:0
After replacing my audio jack only one side work using headphones