crwdns2942213:0crwdne2942213:0
-
-
Locate the tie strap holding the wires and cut with a pair of scissors.
-
-
-
Using wire cutters, cut each wire as close to the wire connector as possible.
-
Cut the wires in both bundles.
-
-
-
-
Using the wire stripper, remove 1/2 inch of the wire insulation at the end of each wire to expose the bare wire for re-connection.
-
-
-
Twist the exposed ends of the wires so that they stay together.
-
Push the wire cap onto the exposed ends while holding the wires and twist in a clock-wise direction until it is tight.
-
Repeat this process for both bundles of wires.
-
crwdns2947410:01crwdne2947410:0
DO NOT TRY THIS..it broke my machine TO NOT TRY THIS