crwdns2942213:0crwdne2942213:0
- 
   
   - 
                     
            Locate the tie strap holding the wires and cut with a pair of scissors. 
 
- 
                     
            
- 
   
   - 
                     
            Using wire cutters, cut each wire as close to the wire connector as possible. 
- 
                     
            Cut the wires in both bundles. 
 
- 
                     
            
- 
                     
                                                
- 
   
   - 
                     
            Using the wire stripper, remove 1/2 inch of the wire insulation at the end of each wire to expose the bare wire for re-connection. 
 
- 
                     
            
- 
   
   - 
                     
            Twist the exposed ends of the wires so that they stay together. 
- 
                     
            Push the wire cap onto the exposed ends while holding the wires and twist in a clock-wise direction until it is tight. 
- 
                     
            Repeat this process for both bundles of wires. 
 
- 
                     
            
crwdns2947410:01crwdne2947410:0
DO NOT TRY THIS..it broke my machine TO NOT TRY THIS
