crwdns2915892:0crwdne2915892:0
Use this guide to open the SteelSeries Stratus Duo controller for repairs and modding.
crwdns2942213:0crwdne2942213:0
-
-
Use your fingers to remove the sticker located on the back cover of the Stratus Duo.
-
-
-
Use a Y0 Tri-point screwdriver to remove the five 9.3 mm-long screws securing the back cover.
-
-
-
Carefully lift the back cover assembly away from the frame and move it downward to uncover the battery cable and the interconnect cable at the top of the motherboard.
-
-
-
-
Using the pointed end of a spudger, push the grey tabs on the interconnect socket away from the socket, parallel to the interconnect cable, to release the cable.
-
-
crwdns2935267:0crwdne2935267:0Tweezers$4.99
-
Use a pair of blunt nosed tweezers or your fingers to pull the cable out of the socket.
-
-
-
Use a pair of blunt nose tweezers to grab and lift the connector away from the motherboard.
-
-
-
Remove the back cover assembly.
-
To reassemble your device, follow these instructions in reverse order.
Take your e-waste to an R2 or e-Stewards certified recycler.
Repair didn’t go as planned? Check out our Answers community for troubleshooting help.
To reassemble your device, follow these instructions in reverse order.
Take your e-waste to an R2 or e-Stewards certified recycler.
Repair didn’t go as planned? Check out our Answers community for troubleshooting help.
crwdns2935221:0crwdne2935221:0
crwdns2935229:04crwdne2935229:0