crwdns2915892:0crwdne2915892:0
Replacing the headlights may be necessary if you are finding that one or both of them are not functioning properly. Once the casing is off and the battery is out it is a very easy task to replace the lights. This guide will give you a detailed step by step process on how to remove and replace these lights and have them functioning like new.
crwdns2942213:0crwdne2942213:0
-
-
Turn the hoverboard upside down and remove the twenty Phillips #1 screws that secure the casing.
-
-
-
After all the screws are removed simply pull off the bottom part of the casing in two pieces (Right and Left).
-
-
-
Disconnect the battery from the circuit board via the orange connector.
-
-
-
-
Remove the four small screws that secures the plastic battery bracket with a Phillips #1 screwdriver.
-
Remove the plastic bracket.
-
-
-
Disconnect the two-pin red and black headlight connectors.
-
To reassemble your device, follow the above steps in reverse order.
Take your e-waste to an R2 or e-Stewards certified recycler.
Repair didn’t go as planned? Try some basic troubleshooting or ask our Answers community for help.
To reassemble your device, follow the above steps in reverse order.
Take your e-waste to an R2 or e-Stewards certified recycler.
Repair didn’t go as planned? Try some basic troubleshooting or ask our Answers community for help.
crwdns2915084:0crwdne2915084:0
Cuesta, Team 10-2, Krynen Fall 2024 crwdns2935289:0Cuesta, Team 10-2, Krynen Fall 2024crwdne2935289:0
CUESTA-KRYNEN-F24S10G2
crwdns2931471:03crwdne2931471:0
crwdns2935297:06crwdne2935297:0
