crwdns2915892:0crwdne2915892:0
How to replace your screen to your HTC Desire 826.
crwdns2942213:0crwdne2942213:0
-
-
Find a seam in the back of the device.
-
Insert the plastic spudger into the seam and pry off the back panel.
-
-
crwdns2935267:0crwdne2935267:0Tweezers$4.99
-
Remove the 4.0 mm screw above the battery with a T5 Torx screwdriver.
-
Remove the metal bracket with the tweezers.
-
-
-
Disconnect the battery cable from the motherboard with the tweezers.
-
-
-
-
Lift the battery with a plastic spudger and remove it from the device.
-
-
-
Remove the two 4.0 mm screws attaching the bottom plastic panel using a T5 screwdriver.
-
Remove the black plastic cover using a plastic spudger
-
-
crwdns2935267:0crwdne2935267:0Tweezers$4.99
-
Use tweezers to pry the wire up from the battery bed
-
Detach the ribbon cable by pulling with the tweezers where circled in blue
-
Flip the phone over so the screen side is facing up for the next step
-
-
-
Use the metal spudger to pry up the plastic cover pieces from the front of the phone
-
-
-
Pry up the edges of the screen using the metal spudger
-
Then use the suction cup to remove the screen from your device
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
crwdns2935221:0crwdne2935221:0
crwdns2935227:0crwdne2935227:0
crwdns2947410:01crwdne2947410:0
Après avoir fait le démontage de l'écran , le digital est devenu très dur et ne réagi pas automatiquement au toucher . Que dois-je faire ?