crwdns2915892:0crwdne2915892:0
This guide helps you with removal and replacing the Screen for HP Pavilion x360 14m-cd0003dx laptop. If your computer powers on, but you see a blank screen or glitches, the screen may need to be replaced.
For further information to determine if the Screen needs to be replaced, please refer to this troubleshooting guide.
crwdns2942213:0crwdne2942213:0
-
-
Turn off the computer.
-
Disconnect the power cord and any external devices connected to the computer.
-
-
-
Use a plastic opening tool to carefully separate the screen from the plastic frame.
-
Work along the top first, and then down the left and right sides.
-
-
-
The screen can then be separated from the frame and laid flat on top of the keyboard.
-
-
-
-
The next few steps involve disconnecting the screen from the laptop in several places.
-
The first place is connected to the left side of the thin blue board at the top.
-
Peel back the clear adhesive and remove the pin header from the port on the blue board.
-
-
-
The next place is underneath the gray adhesive. Peel back this adhesive to expose the connection underneath.
-
Disconnect the gold pin header from its port.
-
-
-
Repeat Step 4 for the connection on the right side.
-
Peel the clear adhesive and remove connection.
-
-
-
Peel the thin gray adhesive strips.
-
Pull out the thin black cable underneath these strips. It is the same black cable that was disconnected in the previous steps.
-
-
-
After the cable has been disconnected, the screen can be removed.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
crwdns2935221:0crwdne2935221:0
crwdns2935227:0crwdne2935227:0
crwdns2915084:0crwdne2915084:0
UMass Dartmouth, Team 7-4, Sinclaire Spring 2022 crwdns2935289:0UMass Dartmouth, Team 7-4, Sinclaire Spring 2022crwdne2935289:0
UMASSD-SINCLAIRE-S22S7G4
crwdns2931471:06crwdne2931471:0
crwdns2935297:06crwdne2935297:0
