crwdns2915892:0crwdne2915892:0
This guide shows how to separate the screen on a Google Pixel 9/9 Pro/9 Pro XL.
crwdns2942213:0crwdne2942213:0
-
-
Unplug all cables and completely power down your phone.
-
-
-
Apply overlapping strips of packing tape to the cracked glass until the whole screen is covered—this will allow the suction cup to stick to the screen.
-
Consider wearing safety glasses to protect your eyes from any glass shaken free during the repair.
-
-
-
Use a hair dryer, heat gun, or hot plate to heat the entire screen until it's almost too hot to touch.
-
-
-
-
Apply a suction handle to the center of the screen's top edge.
-
-
-
Measure 3 mm from the tip and mark the opening pick with a permanent marker.
-
-
-
Pull up on the suction handle with strong, steady force to create a gap between the screen and frame.
-
Insert the tip of an opening pick under the screen.
-
-
-
Slide the opening pick along the top edge to separate the adhesive securing it.
-
-
-
Continue sliding your opening pick around the perimeter of the screen to separate the remaining adhesive.
-