crwdns2915892:0crwdne2915892:0
This is guided instructions for replacing the speaker on the Garmin drive 52 and traffic
crwdns2942213:0crwdne2942213:0
-
-
Pop the suction cup off of the device.
-
Unscrew the four T5 Torx screws on the back.
-
Carefully pry apart the front and back with a Jimmy.
-
-
-
With the top in hand, carefully apply pressure on the top of the screen to pop it out of the front of the case.
-
-
-
-
Remove the four Torx T5 screws.
-
Unplug the two connectors from the motherboard and lift it up and out.
-
To reassemble your device, follow these instructions in reverse order. Take your e-waste to an R2 or e-Stewards certified recycler.
To reassemble your device, follow these instructions in reverse order. Take your e-waste to an R2 or e-Stewards certified recycler.