crwdns2915892:0crwdne2915892:0
This guide provides detailed steps for replacing the internal battery of the DigiLand DL8006. Required items are listed in the "What You Need" section, followed by step-by-step instructions for replacing the battery as you scroll down.
crwdns2942213:0crwdne2942213:0
-
-
Place the device down on its front with the back facing upward.
-
Split the two faces of the device with a plastic opening tool to pry the back cover off.
-
Remove the silver/metallic tape covering the bottom end of the tablet.
crwdns2952109:0crwdne2952109:0
-
-
-
-
Remove the red & black wire that connects the motherboard to the bottom end of the tablet.
-
Remove the ribbon cable over the battery by flipping up the plastic tab on the ZIF connector on either side of the cable and pulling it out.
-
-
-
Remove the red & blue cord connecting the battery to the motherboard.
-
Remove the tape connecting the motherboard to the back of the LED screen.
-
Pry open with a plastic opening tool along the top and bottom edges until the battery is free from the device.
-
Remove all the remaining tape from the battery.
-
To reassemble your device, follow these instructions in reverse order.
crwdns2935103:0crwdne2935103:0
crwdns2935287:0crwdne2935287:0
University of Memphis, Team S2-G5, Kim Fall 2019 crwdns2935289:0University of Memphis, Team S2-G5, Kim Fall 2019crwdne2935289:0
UM-KIM-F19S2G5
crwdns2931471:03crwdne2931471:0
crwdns2935297:05crwdne2935297:0
