crwdns2915892:0crwdne2915892:0
This guide is provided to those who may need assistance on replacing their camera for a "Coby Kyros MID9042" tablet. Replacing the camera on a Coby Kyros MID9042 can be challenging but before you begin, make sure you have the necessary tools, a replacement camera, and a clean, well-lit workspace. Here's a step-by-step guide to help you through the process. Remember to exercise caution throughout the process, and if you encounter any difficulties, consult the device's user manual or seek assistance.
crwdns2942213:0crwdne2942213:0
-
-
After powering off device, remove the anti-slip pads from all 4 corners on the back of the device.
-
Once slip pads are removed, proceed to unscrewing the four 3.2 mm Phillips #0 screws from the back cover.
-
-
-
-
Use the blue plastic opening tool to wedge the back cover apart from the front.
-
Once the edges are wedged apart, use hands to lift up the back of the tablet.
-
-
-
Locate the gold flap and use tweezers to lift the flap up.
-
Use a second pair of tweezers to pull the gold tab connected to the camera out of the circuit board.
-
Once the tab is removed from the circuit board, pull the camera out of the tablet.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
crwdns2915084:0crwdne2915084:0
UMass Dartmouth, Team 2-6, Shastany Spring 2015 crwdns2935289:0UMass Dartmouth, Team 2-6, Shastany Spring 2015crwdne2935289:0
UMASSD-SHASTANY-S15S2G6
crwdns2931471:04crwdne2931471:0
crwdns2935297:06crwdne2935297:0
