crwdns2915892:0crwdne2915892:0
Despite the already large 256GB capacity of the CHUWI Gemibook XPro, you may desire a larger storage space if you handle many files or downloads. This simple guide will assist you in removing and replacing the SSD. For this guide, you will only need a Phillips #0 screwdriver (PH0 bit) and a replacement M.2 2280 SSD.
crwdns2942213:0crwdne2942213:0
-
-
Peel off the black tape on the upper-right side of the motherboard.
-
-
-
Use two opening tools or your fingernails to carefully "walk" the battery connector out of its socket.
-
-
-
Unseat the speaker wires and antenna wire from their retaining hooks on the battery with a halberd spudger.
-
-
-
-
Use a Phillips #1 screwdriver to remove the five 4.3 mm screws that secure the battery.
-
-
-
Lift the battery up and out of the chassis.
-
-
-
Use a Phillips #0 screwdriver to remove the single 3 mm screw securing the SSD.
-
-
-
Carefully grip and pull the SSD out of its port.
-
To reassemble your device, follow the above steps in reverse order.
Take your e-waste to an R2 or e-Stewards certified recycler.
To reassemble your device, follow the above steps in reverse order.
Take your e-waste to an R2 or e-Stewards certified recycler.
crwdns2915084:0crwdne2915084:0
University of North Texas, Team 5-1, Kilpatrick Fall 2024 crwdns2935289:0University of North Texas, Team 5-1, Kilpatrick Fall 2024crwdne2935289:0
UNT-KILPATRICK-F24S5G1
crwdns2931471:04crwdne2931471:0
crwdns2935297:05crwdne2935297:0
