crwdns2915892:0crwdne2915892:0
This is a charging port replacement guide for The Beats Solo 3 Headphones, Model number A1796. No need for more than a Metal Spudger or a pry tool and a Phillips Screwdriver Double Zero. Symptoms which can result in a Charging port replacement can be found on our troubleshooting page.
crwdns2860944:0crwdne2860944:0
crwdns2860947:0crwdne2860947:0
crwdns2890040:0crwdne2890040:0
-
-
Use a nylon or metal spudger to carefully remove the ear pad from the right ear cup.
-
-
-
Use a Phillips #00 screwdriver to remove the seven screws that hold the speaker in place.
-
Note that there are two screws in the big red circle at the bottom.
-
-
-
-
Desolder all wires connecting the newly circuit panel to the rest of the device.
-
Note that there are two wires in the big red circle at the bottom and one in the small red circle above.
-
-
-
Now, after desolder all wires you are able to remove and replace the charging port.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.