crwdns2915892:0crwdne2915892:0
The device will be disassembled down to the motor, the power cords will be disconnected, and the motor removed of your ArmorAll AA255.
crwdns2942213:0crwdne2942213:0
-
-
Remove the orange main housing unit from the vacuum bucket by pulling outward on the handle tabs while lifting upward as shown.
-
-
-
Remove the 15 mm T20 screw. This screw is located nearest the power cord.
-
-
-
-
Gently separate the upper and lower sections of the main housing.
-
-
-
Use a PH2 screwdriver to remove the five 15mm screws on the ball cage under the main housing.
-
Pull the ball cage to remove it from the main housing.
-
-
-
Remove one 13mm nut from the main housing.
-
Remove metal ring from the main housing.
-
Use a PH2 screwdriver to remove the four 12mm screws from the main housing.
-
-
-
Turn the whole body over to separate motor cover.
-
Use a PH2 screwdriver to remove the five 15mm screw.
-
Remove the white power wire from the motor cover.
-
Pull the motor cover from the main housing.
-
-
-
Use a plastic opening tool to remove two cables from the motor. One white cable is from the power cord, and one black cable is from the switch.
-
-
-
The motor is ready for replacement. Pull the motor to separate.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
crwdns2935221:0crwdne2935221:0
crwdns2935229:06crwdne2935229:0
crwdns2915084:0crwdne2915084:0
IUPUI, Team 2-1, Baechle Spring 2016 crwdns2935289:0IUPUI, Team 2-1, Baechle Spring 2016crwdne2935289:0
IUPUI-BAECHLE-S16S2G1
crwdns2931471:04crwdne2931471:0
crwdns2935297:04crwdne2935297:0
crwdns2947412:04crwdne2947412:0
What is the motor product no? It will help if there is a link to buy the motor
Medida de los carboncitos que lleva el motor?
Buenas nochew necesito saber si existe a la venta la hélice o ventiladora que hace la succión de la aspiradora. Porfavor alguien puede ayudarme dejo mi correo erikazavala2882@gmail.com desde Honduras.
Part #for motor ???? Mine just the carbon brush is worn. Need replacement part # for motor or brushes ????
