crwdns2915892:0crwdne2915892:0
Use this guide to replace the rear case on an Anbernic RG35XX.
crwdns2942213:0crwdne2942213:0
-
-
Remove the SD card located on the right side of the device by pushing into the SD card slot and pulling the card out.
-
Remove the six 1.2 mm screws that secure the back case with a 2.5 Hex Bit screwdriver.
-
-
-
-
Insert an opening tool into the MicroSD card slot and twist it clockwise to begin releasing the rear case.
-
Pry around the entire perimeter until the rear case fully releases.
-
Remove the rear case.
-
To reassemble your device, follow the above steps in reverse order.
Take your e-waste to an R2 or e-Stewards certified recycler.
Repair didn’t go as planned? Try some basic troubleshooting or ask our Answers community for help.
To reassemble your device, follow the above steps in reverse order.
Take your e-waste to an R2 or e-Stewards certified recycler.
Repair didn’t go as planned? Try some basic troubleshooting or ask our Answers community for help.
