crwdns2915892:0crwdne2915892:0
The battery supplies power to the device that allows hours of playtime. If the battery isn't turning on, use the Anbernic_RG35XX_Screen_Glitch guide to determine the possible issues. This guide shows how to replace the battery.
crwdns2942213:0crwdne2942213:0
-
-
Remove the SD card located on the right side of the device by pushing into the SD card slot and pulling the card out.
-
Remove the six 1.2 mm screws that secure the back case with a 2.5 Hex Bit screwdriver.
-
-
-
Insert an opening tool into the MicroSD card slot and twist it clockwise to begin releasing the rear case.
-
Pry around the entire perimeter until the rear case fully releases.
-
Remove the rear case.
-
-
-
-
Use your fingernails or tweezers to gently remove the battery connector from its socket.
-
-
-
Use a spudger to gently pry around the perimeter of the battery until it releases.
-
Remove the battery.
-
To reassemble your device, follow the above steps in reverse order.
For optimal performance, after completing this guide, calibrate your newly installed battery.
Take your e-waste to an R2 or e-Stewards certified recycler.
Repair didn’t go as planned? Try some basic troubleshooting or ask our Answers community for help.
To reassemble your device, follow the above steps in reverse order.
For optimal performance, after completing this guide, calibrate your newly installed battery.
Take your e-waste to an R2 or e-Stewards certified recycler.
Repair didn’t go as planned? Try some basic troubleshooting or ask our Answers community for help.
crwdns2915084:0crwdne2915084:0
University of North Texas, Team 6-16, Kilpatrick Fall 2024 crwdns2935289:0University of North Texas, Team 6-16, Kilpatrick Fall 2024crwdne2935289:0
UNT-KILPATRICK-F24S6G16
crwdns2931471:03crwdne2931471:0
crwdns2935297:05crwdne2935297:0
