So how much damage can put microcracks in solder?

So I had stupidly adhered my ps5 slim to a table, so here is what happened. I used a plastic puddy knife, laying flat, with noforceful prying, allowing the plastic blade cut through the dissolving adhesive thanks to some 91 ipa, that whole process was clean, no sudden jerks or bad jolts there.As I was gently pulling the plastic puddy knife out, the leg stayed pretty straight, then as it met the end of the knife near the blade, it dropped down the tiny angel of the blade and made a loud pop or knock sound as the leg hit the table. that was the worst of it as that resulted in the the chassis gently shaking for a second or 2 above the freed leg. Ths console seems to be running fine, and I'm wondering what the probability for latent damage could be later on.